Search found 9 matches
- Thu Oct 22, 2020 9:58 am
- Forum: Software issues
- Topic: ARMbasic problem to read/write DAC registers
- Replies: 6
- Views: 7454
Re: ARMbasic problem to read/write DAC registers
The direct ADC register readout in my example works now! I understand your first approach to handle the SAMD21 in a similar way like the other ARMs you use in your products. But comming from the "8-bit Atmel AVR world like me it was not foreseeable that all registers independent from their real leng...
- Mon Oct 19, 2020 11:39 am
- Forum: Software issues
- Topic: ARMbasic problem to read/write DAC registers
- Replies: 6
- Views: 7454
Re: ARMbasic problem to read/write DAC registers
Bruce, I still have no chance to directly access in general the registers using my robodynM0. When doing so in combination with a print command he program and the IDE execution stuck and the port connected to my computer freezes. I obeyed your advice and used the correct register access depending on...
- Tue Oct 13, 2020 2:58 pm
- Forum: Software issues
- Topic: ARMbasic problem to read/write DAC registers
- Replies: 6
- Views: 7454
Re: ARMbasic problem to read/write DAC registers
Addendum:
also tried to define Reg as a Byte Array ( ARM Basic allows only Byte values within an array ) thinking the root cause is using integer values to work on the registers. But still the problem occurs.
also tried to define Reg as a Byte Array ( ARM Basic allows only Byte values within an array ) thinking the root cause is using integer values to work on the registers. But still the problem occurs.
- Tue Oct 13, 2020 2:39 pm
- Forum: Software issues
- Topic: ARMbasic problem to read/write DAC registers
- Replies: 6
- Views: 7454
ARMbasic problem to read/write DAC registers
Hi, during my evaluation of the SAMD21 (Board is similar to RobotDynM0) I wanted to test the on board D/A converter. As there is no direct statement in ARMBasic to access this peripheral ( May be something is planned by Coridium for an update) I tried the way via the registers. Simple first step by ...
- Tue Sep 22, 2020 9:43 pm
- Forum: Software issues
- Topic: ARMbasic not running in a win32 enviorment
- Replies: 4
- Views: 6891
Re: ARMbasic not running in a win32 enviorment
Thanks basicchip.
Now also my old PC is proudly controlling an ARM chip!
regards
C_hater
Now also my old PC is proudly controlling an ARM chip!
regards
C_hater
- Mon Sep 21, 2020 8:36 pm
- Forum: Software issues
- Topic: ARMbasic not running in a win32 enviorment
- Replies: 4
- Views: 6891
ARMbasic not running in a win32 enviorment
Hi Basicchip, Just tried to install Armbasic also on an older "Lab PC" running Windows10 32 bit. Installation worked properly but when starting the program I received the "blue box" message : "This App can not be executed on the PC. Apply to the the software developer to find a suitable version for ...
- Thu Sep 03, 2020 7:44 am
- Forum: Software issues
- Topic: Pre-processor error
- Replies: 9
- Views: 10225
Re: Pre-processor error
Ok, installed your workaround update and it works!! Assume that you are not the only one to have issues with the latest Windows update ;-) So I can now start exploring the 32bit Controller world. regards C_hater P.S. Interesting: my AVAST Virus scanner has now totaly blocked your new setup file. ( T...
- Wed Sep 02, 2020 5:30 pm
- Forum: Software issues
- Topic: Pre-processor error
- Replies: 9
- Views: 10225
Re: Pre-processor error
Hi basicchip, thanks for your engagement! I'm running Windows64. Blinky returns also with a pre-processor error( see new picture) at least this time with some more details. I opened Blinky.bas with Notepad. So Blinky.bas obviously (example dated from 2012) does not contain a definition of the Arduin...
- Wed Sep 02, 2020 9:44 am
- Forum: Software issues
- Topic: Pre-processor error
- Replies: 9
- Views: 10225
Pre-processor error
Hi, i just have installed the Basic Tools IDE for working with Arduino Zero. I try to use it with a WeMos SAMD21 Arduino M0 clone ( no seperate debug USB port ). Bossa flashed the SAMD21G.bin correctly to the offset address 0x2000. Connection to PC is established properly via COM4 But: When testing ...