Search found 1033 matches

by basicchip
Sat Mar 06, 2021 3:47 pm
Forum: Software issues
Topic: ARMbasic not running in a win32 enviorment
Replies: 4
Views: 1450

Re: ARMbasic not running in a win32 enviorment

The proper way to install BASICtools on a 32 bit system now is to 1 - download and run normal setupBASIC.exe https://www.coridium.us/files/setupBASIC.exe 2 - Open the desktop icon that is installed (right click on Properties) icons.jpg 3 - Change the Target value from BASICtools.exe to BASICtools32....
by basicchip
Fri Mar 05, 2021 11:48 pm
Forum: Your first forum
Topic: Drivers Win7 for LPC11U37 "kickstarter version"
Replies: 46
Views: 64626

Re: Drivers Win7 for LPC11U37 "kickstarter version"

Chris ran into the same issue on the micro:bit and resolved Win7 64 as --- The recent version of the Coridium ARM compiler, BasicTools, installed smoothly on my Win7 64 bit laptop. However, Win7 is noted for not having built-in USB to serial drivers. I went on a fruitless search to get details of ho...
by basicchip
Wed Mar 03, 2021 5:43 pm
Forum: Kitchen sink
Topic: PCB_PINSEL3 issue
Replies: 1
Views: 347

Re: PCB_PINSEL3 issue

You are using some very old firmware 8.08 integer BASIC from 2011, 8.25 from 2013 I sent you that latest SuperPRO firmware from 2018, no changes since then. Make sure you are using the latest BASICtools. You copy that firmware into the \Program Files (x86)\Coridium directory BASICtools will have an ...
by basicchip
Thu Feb 18, 2021 5:00 pm
Forum: Future products
Topic: wireless LCD
Replies: 5
Views: 15753

Re: wireless LCD

We've updated this project with an LPC812. Character LCDs have become plentiful and inexpensive. Some use an I2C I/O expander, but that is relatively slow to control as every byte access requires 6 operations. An LPC812 can be used to implement a serial interface with a higher level commands. This o...
by basicchip
Tue Feb 02, 2021 11:39 pm
Forum: Projects
Topic: 79000 LED Controller Board
Replies: 12
Views: 8173

Re: 79000 LED Controller Board

That file was a couple posts before in this thread. Looks like you bought a version from the store too

But here is that link again

download/file.php?id=521&sid=9cc5dd072a ... dccef8a8e9
by basicchip
Tue Feb 02, 2021 9:38 pm
Forum: Projects
Topic: 79000 LED Controller Board
Replies: 12
Views: 8173

Re: 79000 LED Controller Board

Hi James- I published the firmware for the LPC1114 above, it does not matter which package it is in. Just copy that firmware .hex file into the same directory as BASICtools. BASICtools looks for them to install on a blank NXP device as long as you connect serial data lines, reset and boot pin. Yes t...
by basicchip
Tue Feb 02, 2021 6:10 pm
Forum: Projects
Topic: 79000 LED Controller Board
Replies: 12
Views: 8173

Re: 79000 LED Controller Board

Hi James, thanks for posting. NXP discontinued the LPC1114 in DIP28 format, but as you know it is available in TSSOP-28. We have not seen enough demand to build a board around it, having switched to the LPC11U37 as our entry level product the ARMstamp https://www.coridium.us/coridium/shop/boards/bd0...
by basicchip
Sat Nov 28, 2020 6:08 am
Forum: Kitchen sink
Topic: ProStart I/Os are scrambled
Replies: 4
Views: 1226

Re: ProStart I/Os are scrambled

Sorry for the mixup Ron, I should use a bigger pen when marking BAD, we keep them around for other experimentation, though really it's very few.

I'll send out a couple replacements next week.
by basicchip
Thu Nov 26, 2020 2:07 am
Forum: Kitchen sink
Topic: ProStart I/Os are scrambled
Replies: 4
Views: 1226

Re: ProStart I/Os are scrambled

Hi Ron- Does the welcome message say it is for the BASICchip? I am wondering if a board in stock had the wrong firmware or an older version. It should report 8.40b as the version. Here is that firmware, which you can load by copying into the directory where BASICtools is (usually /Program Files (x86...
by basicchip
Mon Oct 19, 2020 2:44 pm
Forum: Software issues
Topic: ARMbasic problem to read/write DAC registers
Replies: 6
Views: 1833

Re: ARMbasic problem to read/write DAC registers

I've updated the library in the installer for the SAMD21, as well as the SAMD21_timer example. There is a way you might have seen this. One option in BASICtools is to show the pre-processor output, which loads that into your editor. It would have shown - directvalue = RD_HALF(*&H4200401A) ' note the...