Search found 396 matches

by olzeke51
Sun Nov 21, 2021 9:25 pm
Forum: Other Hardware interfaces
Topic: How to program the ProStart LPC1114 with LPC's FlashMagic
Replies: 4
Views: 1899

Re: How to program the ProStart LPC1114 with LPC's FlashMagic

There is a 'loadC' hole near the corner - it needs to be connected to GND to program/receive the data. the hole next to it iwth the thick trace
Are you doing Basic or bare metal?? - sounds like bare-metal,
HTH - gary Olzeke51
by olzeke51
Sun Sep 12, 2021 10:28 pm
Forum: Projects
Topic: Trying to interface Super Pro to VL53L1X TOF distance sensor
Replies: 1
Views: 3146

Re: Trying to interface Super Pro to VL53L1X TOF distance sensor

Yo', Haven't done much with I2C but I just came across this chip in another article - checkout the TCA9548A - it is an 8 device buffer/selector for I2C , so you send the TCA the port number you want further I2C traffic to send/receive then you just communicate with that device's address like you nor...
by olzeke51
Sun Sep 13, 2020 1:21 pm
Forum: Software issues
Topic: Pre-processor error
Replies: 9
Views: 7735

Re: Pre-processor error

Hello C_hater, - welcome to the group. A while back a new user asked for some general tips on getting going. I wrote a post to him, it is the sixth post on his topic https://www.coridium.us/forum/viewtopic.php?f=4&t=1395&p=4488&sid=14ddfd8dd64b2f77791179f3110e79fc#p4488 ' Hope you are having fun. th...
by olzeke51
Sun Aug 23, 2020 2:02 pm
Forum: Software issues
Topic: Callback clarificaton
Replies: 2
Views: 3899

Re: Callback clarificaton

Thank You, I had forgotten about the in's and out's of DIM to clarify for others: . CALL_1_ADDR = 0 'globally define a CALLBACK address . HAS to go before the other DIMmed Global Variables [if you have any that are DIM'd] . olzeke51 PS> Main: is obviously under the SUBs but before the re-assignment ...
by olzeke51
Fri Aug 21, 2020 9:16 pm
Forum: Software issues
Topic: Callback clarificaton
Replies: 2
Views: 3899

Callback clarificaton

I am having trouble with this statement in your on-line Help page for "GOSUB"

Code: Select all

CALL_1_ADDR = 0       globally define a CALLBACK address  
'
where is this in relationship to the Main: label ???
'
Thank you,
Olzeke51
'
PS. I had some earlier notes on 'callbacks program flow' that are now outdated.
by olzeke51
Wed Aug 12, 2020 9:56 pm
Forum: Kitchen sink
Topic: Documentation, broken link
Replies: 63
Views: 127317

Re: Documentation, broken link

Was perrusing the online HELP file for information on __ASM__ topic.
two bad links : 1) the 'ARM7thumb.pdf' isn't avail
and the 'forum' link is ???? [not related?]
_ASM_error_help.jpg
_ASM_error_help.jpg (77.34 KiB) Viewed 5323 times
'
Olzeke51
by olzeke51
Wed Aug 12, 2020 7:00 pm
Forum: Software issues
Topic: NXP Drivers
Replies: 1
Views: 3075

NXP Drivers

Hello BasicChip,
With the newer NXP chips using the builtin USB interfaces.....
Have you considered adding NXP drivers to the "Driver Install" option of BasicTools??
'
A thought
Gary Olzeke51
by olzeke51
Thu Aug 06, 2020 12:01 pm
Forum: Software issues
Topic: embedded FUNCTION/SUB
Replies: 2
Views: 3579

embedded FUNCTION/SUB

BasicChip - mornin' Ran into an issue with a FUNCTION(or a SUB) inside a SUB - is it legal?? "I was hoping to keep everything in the SUB task3 - so it could be transferred easily" ' the following statements would imply [to me] that it is possible ' Help File re: SUB says this" Code labels for goto/g...
by olzeke51
Wed Aug 05, 2020 6:55 pm
Forum: Serial Communication
Topic: USB vs. UART communication
Replies: 5
Views: 16162

Re: USB vs. UART communication

uhh, Is there a way to get input on the USB channel as if it was a serial uart? ? similar to RXD(x) ' CASE: LPC54005 dev board : wanted to use the USB connected to a PC as terminal printf will work for outgoing, I assume I need to use DEBUGIN stuff$ ..then parse it(if I have just numbers) but also w...
by olzeke51
Wed Jul 22, 2020 6:06 pm
Forum: Software issues
Topic: MakeItC_v12_3 - issue3?
Replies: 7
Views: 7507

Re: MakeItC_v12_3 - issue3?

so if .ino files are kind of history
should they be the default file-type to look for??