Search found 1053 matches

by basicchip
Wed Jan 16, 2013 11:42 pm
Forum: Software issues
Topic: Mac OS C support
Replies: 5
Views: 10857

Re: Mac OS C support

I could install Windows on my system and boot to it or run Parallels but that is what I was trying to avoid. From what I've heard so far and from my poking around on other sites there does not seem to be a good shareware program for ARM 7 development on the OS X. Not a big surprise. I think I'll bac...
by basicchip
Wed Jan 16, 2013 11:41 pm
Forum: Software issues
Topic: Mac OS C support
Replies: 5
Views: 10857

Re: Mac OS C support

What about running windows or linux in the Virtual Tool under OSX? Sorry I have seen it, but don't recall the name of the app. --- In ARMexpress@yahoogroups.com, "edelen.glenn" wrote: > > I really like the ARMmite Pro board but I'm on a Mac running OS X and don't want to have to load Windows on my s...
by basicchip
Wed Jan 16, 2013 11:40 pm
Forum: Software issues
Topic: Mac OS C support
Replies: 5
Views: 10857

Re: Mac OS C support

But OSX is Unix, BSD flavor to be exact, so it should work. Even these guys said so almost 2 years ago. http://coding.derkeiler.com/Archive/Tcl/comp.lang.tcl/2006-12/msg00471.html I would be VERY surprised that if it did not work. Unless your Tcl is very old, please tell me you aren't still on 7.5x?...
by basicchip
Wed Jan 16, 2013 11:40 pm
Forum: Software issues
Topic: Mac OS C support
Replies: 5
Views: 10857

Re: Mac OS C support

> I really like the ARMmite Pro board but I'm on a Mac running OS X and don't want to have to load Windows on my system. Does anyone know if you can run the MakeItC libraries for this board on a Mac? MakeItC and BASICtools are written in Tcl which is a cross platform language. BUT on the Mac, Tcl do...
by basicchip
Wed Jan 16, 2013 11:39 pm
Forum: Software issues
Topic: Mac OS C support
Replies: 5
Views: 10857

Mac OS C support

I really like the ARMmite Pro board but I'm on a Mac running OS X and don't want
to have to load Windows on my system. Does anyone know if you can run the
MakeItC libraries for this board on a Mac?
by basicchip
Wed Jan 16, 2013 11:37 pm
Forum: SPI and I2C
Topic: micro SD card
Replies: 6
Views: 11013

Re: micro SD card

--- In ARMexpress@yahoogroups.com, "espnleague" wrote: > > --- In ARMexpress@yahoogroups.com, "basicnode" wrote: > > > > Just looking at the spec for a generic SD card, the command sequence is much more complex than sending a single byte. It involve a bi-directional sequence of 7 bytes out and 1-2 b...
by basicchip
Wed Jan 16, 2013 11:35 pm
Forum: Software issues
Topic: Other text editors
Replies: 2
Views: 6520

Re: Other text editors

>from help line >... what's driving > me crazy at the moment is trying to get a short (1-2usec) > delay to give the open drain clock lines enough rise > time... > trying something like this: void dly1() { for (x=0; > x<100; x++) z++; } where x and z are ints > > can you explain why the compiler give...
by basicchip
Wed Jan 16, 2013 11:34 pm
Forum: Software issues
Topic: delays with loops
Replies: 0
Views: 5315

delays with loops

>from help line >... what's driving > me crazy at the moment is trying to get a short (1-2usec) > delay to give the open drain clock lines enough rise > time... > trying something like this: void dly1() { for (x=0; > x<100; x++) z++; } where x and z are ints > > can you explain why the compiler give...
by basicchip
Wed Jan 16, 2013 11:33 pm
Forum: Software issues
Topic: Other text editors
Replies: 2
Views: 6520

Re: Other text editors

It could be as simple as just running makeitc via command line. I don't mind that. Just take your button function, and be able to call that on the command line. The output can just be the gcc output directed to the output stream. I am surprised you didn't start with the cmdline code first, then buil...
by basicchip
Wed Jan 16, 2013 11:32 pm
Forum: Software issues
Topic: Oberon language support
Replies: 12
Views: 18408

Re: Oberon language support

--- In ARMexpress@yahoogroups.com, "cfbsoftware1" wrote: > > --- In ARMexpress@yahoogroups.com, "basicnode" wrote: > > > > > Has anyone tried Programming any of the Coridium boards using > this compiler? http://www.armaide.com/ > > > (Oberon is a decendent of Pascal/Modula-2 by N. Wirth). > > > > > ...