Search found 1086 matches

by basicchip
Fri Apr 14, 2023 8:54 pm
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

You have lost the connection to the Coridium board. Power down, check connections repower, restart BASICtools...
by basicchip
Fri Apr 14, 2023 5:02 pm
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

Debugging involves walking before you can run. Once you made sure power is correct to both devices. Next you check whether the i2c SCL and SDA lines are wiggling (logic probe is fine, maybe even a meter) Then can you address the device? Note that the I2Cspeed50 must be done before I2C.bas (maybe tha...
by basicchip
Thu Apr 13, 2023 5:13 pm
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

I2C.bas treats the address as an 8 bit value with the LSB indicating read or write.

What that does tell me that the 80 address is decimal as 80 hex would be an 8 bit address not 7.

So there is something else going on.
by basicchip
Thu Apr 13, 2023 12:14 pm
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

While it mentions 80 as the default address in the spec, it never specifies hex or decimal. I see your code uses decimal, maybe its hex? But you should narrow down why the i2c routines are returning 0, which means ACKs are not being received.
by basicchip
Wed Apr 12, 2023 1:01 am
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

Yes those pins are not normally open drain, but the I2C.bas routines either drive the pin low, or make it an input, effectively open drain. Check power to the display, make sure you are actually wiggling the right pins, if you don't have a scope, I posted a blog article about how to build a logic pr...
by basicchip
Mon Apr 10, 2023 11:27 pm
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

If i2c routines are returning 0, means the target device is NOT acknowledging.

Either miss wired, no pullups, or ...
by basicchip
Mon Apr 10, 2023 8:18 pm
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

As I read the spec sheet, the 254, 160, 0 command would be sent in SERIAL mode to return data in i2c mode If your jumpers are set to i2c that should not be needed. Did you change it to i2c (from spec sheet) The Protocol Select Jumpers provide the means necessary to toggle the GLK19264A-7T-1U between...
by basicchip
Tue Mar 28, 2023 3:31 pm
Forum: Other Hardware interfaces
Topic: Interfacing to old ttl chips
Replies: 5
Views: 996

Re: Interfacing to old ttl chips

You really need to be more specific about the part numbers. The 4068 comes in lots of varieties, the CD4068 normally is powered by 5V and requires inputs higher than 3.3V to switch, so would require buffering or pullups. I'm not sure what a ULN2009 is (a typo maybe). Same goes for 40438. Spec sheets...
by basicchip
Tue Mar 28, 2023 2:57 am
Forum: Other Hardware interfaces
Topic: Interfacing to old ttl chips
Replies: 5
Views: 996

Re: Interfacing to old ttl chips

If you are using ULN2003A chips, you can drive those directly from the SuperPRO IO

They turn on at 2.4-2.7 V (from the spec sheet)

LPC1756 outputs 4mA (from the NXP spec sheet)

I have driven these directly before.
by basicchip
Tue Mar 21, 2023 9:01 pm
Forum: SPI and I2C
Topic: Simple example of I2c code " My World" request
Replies: 48
Views: 7070

Re: Simple example of I2c code " My World" request

I don't have any i2c displays, always opted for either serial or SPI.

Do the displays you have supply code examples?

-- edit --

I was looking at the website for Matrix Orbital, very expensive, take a look at New Haven 1/5 the cost and we have published examples. Digikey also carries them.