Documentation, broken link

basically miscellaneous, if it doesn't fit another sub-forum enter it here, we might even promote it to its own sub-forum
mikechris
Posts: 12
Joined: Sat Apr 29, 2017 12:02 pm

Re: Documentation, broken link

Post by mikechris »

ARM Stamp Doc issue:

As of the ARMbasic.chm version downloaded on 4/18/20, the 'LPC11U37 Details' page shows:
Pin J1-1, SOUT, IO(18), SP16
Pin J1-2, SIN, IO(19), SP17
The IO#'s are not consistent with the schematic or the LPC11U37 user's manual.
SOUT connects to a TXD output of the LPC11U37, IO(19) (port PIO0_19 as per Table 95).
SIN connects to an RXD input of the LPC11U37, IO(18) (port PIO0_18 as per Table 94).
The IO#'s for these two pins are swapped in ARMbasic.chm.
The SP#'s could be swapped or remain the same if STAMP_PINS.bas was changed.



basicchip
Posts: 1090
Joined: Fri Oct 19, 2012 2:39 am
Location: Weeki Watchee, FL
Contact:

Re: Documentation, broken link

Post by basicchip »

OK you win the prize for longest important un-noticed typo. Thanks for pointing that out. The schematic is correct

The STAMP_PINS.bas file should swap the 18 and 19

As well as the help file pin diagram, making the web help changes now, the others will take effect when I do a new setupBASIC.exe

olzeke51
Posts: 414
Joined: Sat May 17, 2014 4:22 pm
Location: South Carolina

Re: Documentation, broken link

Post by olzeke51 »

Was perrusing the online HELP file for information on __ASM__ topic.
two bad links : 1) the 'ARM7thumb.pdf' isn't avail
and the 'forum' link is ???? [not related?]
_ASM_error_help.jpg
_ASM_error_help.jpg (77.34 KiB) Viewed 6966 times
'
Olzeke51

basicchip
Posts: 1090
Joined: Fri Oct 19, 2012 2:39 am
Location: Weeki Watchee, FL
Contact:

Re: Documentation, broken link

Post by basicchip »

fixed, thanks, happened when the website changed ISPs

Post Reply