Can anyone tell me if I could use the battery header on the pro plus to connect
to the +5v to supply the board with power or does it have to be +3.3v.
Thanks in advance Richard
PROplus power requirements
-
YahooArchive
- Posts: 1462
- Joined: Fri Oct 19, 2012 5:11 am
Re: PROplus power requirements
In The help files is a diagram of the power connections.
All the supplies are diode OR'd with the 5V into the regulator. Which means yes
you can connect 5V at the battery terminals (marked + and -) .
All the supplies are diode OR'd with the 5V into the regulator. Which means yes
you can connect 5V at the battery terminals (marked + and -) .
-
YahooArchive
- Posts: 1462
- Joined: Fri Oct 19, 2012 5:11 am
Re: PROplus power requirements
> Can anyone tell me if I could use the battery header on the pro plus to
connect to the +5v to supply the board with power or does it have to be +3.3v.
>
In The help files is a diagram of the power connections.
All the supplies are diode OR'd with the 5V into the regulator. Which means yes
you can connect 5V at the battery terminals (marked + and -) .
Thank You
connect to the +5v to supply the board with power or does it have to be +3.3v.
>
In The help files is a diagram of the power connections.
All the supplies are diode OR'd with the 5V into the regulator. Which means yes
you can connect 5V at the battery terminals (marked + and -) .
Thank You