CAN bus
Posted: Thu Oct 25, 2012 6:15 pm
>question from tech support line-
Would it be possible to build a CAN bus interface for the ARMmite board?
---------------
To implement CAN bus would require a CAN interface chip such as the
MicroChip MCP2515 which can be controlled from its SPI interface.
The PROpl.us and SuperPRO have integrated CAN controllers
Would it be possible to build a CAN bus interface for the ARMmite board?
---------------
To implement CAN bus would require a CAN interface chip such as the
MicroChip MCP2515 which can be controlled from its SPI interface.
The PROpl.us and SuperPRO have integrated CAN controllers