ProStart-arduino pinout

Questions on other types of hardware and getting it talking to the ARM CPU
Post Reply
olzeke51
Posts: 414
Joined: Sat May 17, 2014 4:22 pm
Location: South Carolina

ProStart-arduino pinout

Post by olzeke51 »

Is there an errata sheet/info for the ProStart schematic pdf??
the J4 & J5 connector signals don't match the silkscreen -- the PCB is a REV3
particularly P1-9,8,5 seems mixed up
2 the schematic shows a serial memory chip - was that a customer mod??, I don't see any lands for it.
'
I want to build a 'universal' LCD[4-bit mode], hex keypad shield that will work on several of the Coridium boards.
My own 812 ( see my Project for 812 eval HVAC) and the ProStart Board for beginners.
'
Arnold - did you get the LCD working on your bandsaw ??- you started that in the spring



basicchip
Posts: 1090
Joined: Fri Oct 19, 2012 2:39 am
Location: Weeki Watchee, FL
Contact:

Re: ProStart-arduino pinout

Post by basicchip »

Oops, it never got updated, the file has been updated now. The silk screen on the PCB was always correct.

Post Reply