BLINKY update for LPC812
Posted: Wed Jun 18, 2014 4:27 pm
Here is a modified 'BLINKY' Example file for the Basic SO-20/LPC812
You need to connect an LED to power(anode) and chip pin 9 (cathode-flat side)[pio0_10]
This is one of the two I2C pins that has no pullup on it.
Have fun!!
You need to connect an LED to power(anode) and chip pin 9 (cathode-flat side)[pio0_10]
This is one of the two I2C pins that has no pullup on it.
Have fun!!